Insulation fire reported at Arizona nuclear plant - East Valley Tribune: Public Safety

Insulation fire reported at Arizona nuclear plant

Print
Font Size:
Default font size
Larger font size

Posted: Tuesday, September 3, 2013 6:15 pm | Updated: 6:16 pm, Tue Sep 3, 2013.

The Palo Verde Nuclear Generating Station declared an unusual event when oil-soaked insulation behind a water pump caught fire, officials said Tuesday.

The Monday night fire did not interrupt power production at the three-reactor plant located 50 miles west of downtown Phoenix, and Arizona Public Service Co. said the plant continued to run normally Tuesday.

An unusual event is the lowest of four emergency levels for nuclear power plants.

APS told the federal Nuclear Regulatory Commission that there was no release of radioactive material and no threat to public health or safety.

APS spokesman said the cause of the fire is under investigation, but NRC spokesman Victor Dricks said it appeared that insulation that covers very hot metal surfaces had become soaked by bearing lubrication over time.

APS’ notice to the NRC said the fire occurred in the insulation behind a pump that feeds water that becomes steam as part of the power generation process and that a small leak of oil vapor was found in a high-pressure seal. Palo Verde firefighters responded when a security guard spotted smoke in a turbine building of Unit 2. The fire was declared out 45 minutes later.

© 2014 The Associated Press. All rights reserved. This material may not be published, broadcast, rewritten or redistributed.

More about

More about

More about

  • Discuss
Your Az Jobs